Note from the Man himself: I'd recommend going with a higher value for that 47R resistor. Try 220R, 330R, or 470R. Or even a little higher. The lower the value, the more gain there is, but it's really noisy at 47R. Like, unusable noisy, at least on my test build.
Thanks!!
ReplyDeleteI'd recommend going with a higher value for that 47R resistor. Try 220R, 330R, or 470R. Or even a little higher. The lower the value, the more gain there is, but it's really noisy at 47R. Like, unusable noisy, at least on my test build.
ReplyDeleteThanks for info! I'll add it to the post.
Delete(still didn't get around breadboarding the DownBox...)
+m
shouldnt there be a 1nf box cap in there? the grind customs schematic i have shows a 1nf running off the input next to the 100n. is this an error? or do vero layouts not necessarily mimic schematics for pcb?
Deleteyou can mark this as verified btw. i went with 82ohms instead of the 47r mentioned in notes. other than that didt change a thing. sounds great
ReplyDelete