Madbean Zombii / ZVex Fat Fuzz Factory

Tweaked Mark's original compact layout according to the info i found on the fat mode switch. Should be good to go.

Madbean Stank

Here is Brian's version of Aron Nelson Smash Drive with added TMB tone stack and recovery JFet buffer.
There are no videos available but you can find info and schematic on Madbean's website here.

Madbean Tapanator Projects

Here are some great new Tap-Tempo projects by Madbean.
I prefer to add them all in the same post because they are meant to work together.
You could use 1/8" jack & plugs.
You can find all info and his great (and cheap!) PCBs on his website here.
The TapLFO is available from SmallBear here.

Madbean Cave Dweller (2015)

Here is the newer version of the Cave Dweller.
You can find Brian's original project here.
Original info:


The Cave Dweller 2015is a total re-design of the Cave Dweller project from 2012.

While the original Cave Dweller was a simple and colorful sounding delay it had a few drawbacks;

it was pretty lo-fi, and darkened the dry guitar tone somewhat. This was due to the limitation of using only the PT2399 for both dry signal and delay signal processing. The objectives for the re-design were to improve the quality of delay and dry guitar signal without requiring as many parts as a full-fledged delay circuit such as the MBP ZP Micro. This is accomplished by introducing a new input stage for dry signal processing and also by adding additional filtering to the delay signal. The result remains fairly low in parts count without compromising on the delay tone.

Madbean Sharkfin Filter (Maestro FSH-1 without Sample&Hold)

Here is a layout for Madbean Sharkfin filter side.
There is already a verified layout for the complete project but I've preferred to use a separated post for this one
24/08/16 Layout updated!
Moved bottom left 3K3 resistor up one row to connect it to 150n output cap.

Madbean Sharkfin (Maestro FSH-1 Filter, Sample & Hold)

Here is Brian's modified version of the old Maestro FSH-1.
You could buy his PCB here and find all infos about this project here.

Madbean Ping (Reverb)

A great simple reverb from Madbean.
You can find his 1590G size boards and infos on his website.

The way the layout has been drawn you should be able to solder the brick directly to the board and lay it under it.

Madbean Turnabout (JHS Andy Timmons)

Brian's take on JHS Andy Timmons pedal.
This is not an exact clone of the original circuit and the video is for reference only:

Madbean Wigl (Vibe)

Brian's take on John Hollis Easyvibe.
You can find his 1590G size boards on his website.
Check his original notes here for more infos on how to build this project!

 

 Here is another version with Mark Hammer's anti-ticking mod as suggested by Ciaran:

Madbean Glam (Chorus)

Here is Brian's new PT2399-based chorus.
You can find all infos from his website here.

Here is a video by Ciaran:

Madbean Fencepost (Noise Gate / Expander)

Here is Brian's version of Armdnrdy's project from the DIY Forum.
You can find the original thread with all the infos here and Brian's version here.

Madbean Holy Roller / Baja Optical Limiter

This is Brian's version of Bajaman Optical Limiter.
Here you can find the original thread.

Note:
You could swap D3 with 100R resistor and 100uF cap with 220uF if too noisy.

Madbean Leviathan (Wampler Faux Analog Echo Delay)

Madbean's great new project based on Wampler Faux Analog Echo Delay.
Original infos available here.

This video is for reference only:

Madbean Gravity Wave (Earthquaker Devices Sea Machine)

Madbean's great new project based on Earthquaker Devices Sea Machine.
Original infos available here.
17/07/2016 Layout updated!
Changed 33n cap to 3n3 and 10k resistor from PT2399's pin 14 back to 1K.

Madbean Shortstack Overdrive

Noticed frank had posted this in response to someones questions about the bluesberry mod for the hotcake. When i compared the schematic to the hotcake i noticed a few differences so I thought it would be a nice addition and variation to have on the site. The only addition to the schematic I mad is I added the typical 1M pulldown resistor to prevent any switch popping.

Madbean Pig Butt

Brian's description:
The PigButt is a modded Op-Amp Muff.
It's a nasty little beast, full of saturated distortion; not too edgy nor too smooth.
It provides a wonderfull "wall of fuzz" like the Big Muff but with a different feel and texture.
The PigButt also features a tone bypass switch for even greater distorted output.

Madbean FatPants Jr.

Madbean's 2015 version of his FatPants boost.
No videos available at the moment.

Madbean Flabulanche / Snow Day Overdrive-Compressor

Here are Jon Patton's original Snow Day Overdrive and Madbean's modified version (Flabulanche).
You can find all infos on Brian's website:
http://www.madbeanpedals.com/projects/Flabulanche/Flabulanche_2015.pdf

Jon Patton's video:

- 2n5457s are biased around 12V.

Madbean Zero Point SDX2

Madbean's updated version of his great Zero Point SDX delay pedal.
You can find all infos on this circuit or buy one of his PCBs here:
http://www.madbeanpedals.com/projects/index.html
There are no videos available at the moment.

Madbean Harbinger One

This is Madbean's version of the famous Univibe pedal.
I've added a "Multi-Vibe Mod" to it.
You can find all infos on this circuit or buy one of his PCBs here:
http://www.madbeanpedals.com/projects/index.html

09/11/2016 Layout Updated! Changed the charge pump daughter board.

There's also a different but verified layout by Savvas in the Forum section.