Here's a collection of vero (stripboard) and tagboard guitar and bass effect layouts that we have put together covering many classic and popular effects in growing numbers. Many of these have been posted on freestompboxes.org, so check that site out for great discussions on building your own effect pedals. Enjoy the builds and please also visit us on Facebook and Twitter
Hi Mirosol, Ive finished and verified this one. It has lots of gain and volume, plenty of control with the 3 tone pots and as a whole gives a nice all round choice of sounds. You can keep it real clean and chunky or really dirty and thin or vice versa, great for a pal of mine who is a bit of a tonal obsessive where the guitar is concerned. Great stuff thanks. Jim
Always thought this one was a modded Guv'nor.
ReplyDeleteAlways thought that was a TL072 inside!
ReplyDeleteThat should work fine too. Schematic has it for JRC4558 though:
Deletehttp://www.freestompboxes.org/viewtopic.php?f=1&t=4005
+m
The Danelectro Daddy-O has been my #1 OD pedal on my pedal board for the last 15 years or more. I really like it. Thanks for posting this!
DeleteHi Mirosol,
ReplyDeleteIve finished and verified this one. It has lots of gain and volume, plenty of control with the 3 tone pots and as a whole gives a nice all round choice of sounds. You can keep it real clean and chunky or really dirty and thin or vice versa, great for a pal of mine who is a bit of a tonal obsessive where the guitar is concerned. Great stuff thanks. Jim
Great thanks Jim, I'll tag it
DeleteCheers Jim! I have the original and i like it a lot. Very good drive pedal.
Delete+m
Hi, I built this and seem to have no output. My IC voltages are as follows:
ReplyDelete1 - 3.02
2 - 3.2
3 - 2.76
4 - 0
5 - 2.99
6 - 3.6
7 - 6.06
8 - 6.06
No visible bridges and checked with a magnifying glass. the diodes dont light up at any point either.
Thanks in advance