Monday, 21 March 2016

Parasit Studio - Arcadiator 2.0

A new release by Fredrik (Freppo) from Parasit Studio.
You can find all infos and pcb on his website.
There is also a layout for his new Sentient Machine on our Forum/Contributions section.

Here are two videos for v. 2.0 and v.1 to give you an idea until a new video will be recorded:





You could add his Modboard daughter-board for extra modulation:

26 comments:

  1. Nice one Alex, great job. Just need to get a 4070 to build this.

    ReplyDelete
  2. Freppo & Alex you are real punk Rock in a world full of TSers. Michi thanks.

    ReplyDelete
  3. Does it matter if any of the IC's are buffered or un-buffered (BE vs. UBE)? I know sometimes it matters, but maybe not in this case? Thanks for the layout!

    ReplyDelete
    Replies
    1. Use 4070BE, 4024BE and 4069UBE (4069 is only avaliable as unbuffered)

      Delete
  4. Fredrik should be able to answer your question.
    He used 4070BE, 4024BE and 4069UBE.
    You can buy all those from Tayda.

    ReplyDelete
  5. Sorry for for additional question, but for the DPDT switch, i just want the ON/ON, correct?

    ReplyDelete
  6. Any suggestions for a good source of vactrols?

    ReplyDelete
    Replies
    1. Banzai in berlin, germany has wide selection, but the prices are through the roof since the manufacturing has seized. Due to that, i'd recommend rolling your own. Red LED with Excelitas LDR cell should do it.
      http://www.farnell.com/datasheets/1475763.pdf
      Now we'll only need a reliable source for 50M, 5M and 1M LDRs... :)
      +m

      Delete
    2. I've never used LDRs so I'm a bit ignorant on them... would these from Tayda be sufficient (gut says "no", but i gotta ask anyway)? http://www.taydaelectronics.com/resistors/photoresistors/photo-conductive-cell-resistor-ldr-650nm-radial-ke-10720.html

      Delete
    3. It's funny, but before I knew anything I happened to order some LDRs I saw online. They have all worked in everything I have made (maybe 5 different projects). I even just finished the dreaded Mutron III - all you need to do is match them up with an LED. It works best if you take a piece of shrink wrap, bend the LDR over to a right angle and put it right alongside the LED. Then shrink the tubing.

      If you get distortion it is usually because the LED is to bright, so use a trimpot or resistor to bring down the brightness.

      I am not sure which model I got but it seems to work on everything because it has a wide range and I think most of them have ranges that overlap to great degree. Just google this "Light Dependent Resistor Photoresistor" and hit "shopping" and you will see all the different ranges offered on eBay. There is really nothing to it, you just have to put it together.

      What you posted should work, but that is expensive. You can get them for $.05 - cents

      Delete
    4. I tried putting the cheap tayda LDRs in my Gigahearts Doubel Ganger (Lovetone Doppelganger clone) and the depth was so weak. I swapped in the recommended LDRs from small bear and it's so lush. They don't even tell you the light/dark range on the tayda ones.

      Delete
  7. Is dpdt
    1 4
    2 5
    3 6?

    This looks like the most fun. Thanks Alex and Fredrik

    ReplyDelete
  8. Both verified! I'm really liking this and the adition of the modboard really makes even better. Thanks Alex n Freppo.

    ReplyDelete
    Replies
    1. Brotherleech that is the correct layout for a DPDT

      Delete
    2. Thanks gavin. I'd actually already built it as it was a past minute birthday present so I just took a punt. I didn't do the modboard but seriously, what a pedal! I'm making one for myself now.

      Delete
  9. I already had V1 but given I had nothing else to do V2 was a cool little exercise. Thanks Freppo for all your cool work!

    http://imgur.com/S5gsDU1

    ReplyDelete
    Replies
    1. Awesome looking build! Thanks for sharing! :)

      Delete
  10. I'm only counting 20 links on the main board... Is there something that I'm missing here?? Diagram says there should be 21.

    ReplyDelete
  11. You might not be counting the double link under the 4069 as two links?

    ReplyDelete
  12. stupid question but ive made the mod board and connected it and it works but unsure where i9 hook the ground to the led on the mod board to it seems to only pulse when i touch the mod board

    ReplyDelete
  13. What´s the effect of the modboard here?

    ReplyDelete
  14. Version 2.0 suppose gate the LFO ticking when LFO is ON and guitar signal is absent. However I still get LFO ticking (Rate LED diode blinks as well) when LFO is ON and guitar signal is absent. Is it normal behaviour of 2.0 version?

    ReplyDelete
  15. Can this daughter board be added to version 1 of the Arcadiadtor?

    ReplyDelete
  16. what kind of readings should i get from the ldr of the vactrol? i'm either not hooking it up right or there is something wrong with my mod board. i have connected the ldr leads to width 1/2 and width 3. it just sounds like the width pot is maxed out and no modulation. i don't have an oscilloscope but, depending on the vactrol i use, i am getting roughly 2k to 5k on my multimeter. should it be higher?

    ReplyDelete