Saturday 22 March 2014

EarthQuaker Devices Speaker Cranker

Info about the original:

The Speaker Cranker is an all discrete dirt enhancement device designed to give your signal some grit and a slight boost without drastically changing the character of your tone. It’s perfect for those that don’t like to fiddle with pesky controls yet want to add a little tube-like breakup or enhance an already over driven amp (or pedal) to give it some extra crunch without over loading the preamp. The single “More” control allows you choose the amount of break up you desire. Just like you would with a tube amp, back it off to thin out the sound and clean it up or crank it up for a fuller sound with a bit of compression. Did we mention it’s an overdrive and not a booster? It’s an overdrive not a booster. All analog, true bypass and handmade one at a time in the pit of Akron, Ohio.






91 comments:

  1. That demo sounds really nice. I have some bat41,42, and 46s. Those would work for this, I think. Would any one of those be better than the other?

    Thanks

    ReplyDelete
    Replies
    1. Yes all those would be fine. I think they will all sound very similar so I'd just use one I had most of.

      Delete
    2. Cool. Appreciate it. Now I gotta go dig through the transistor bags for the 3904. I seriously need to get organized...

      This will be a nice Saturday afternoon build. Wonder what normal people do with their time.... :)

      Thanks for the layout

      Delete
    3. Guess that makes me normal then ;)

      Delete
    4. My wife thinks I'm a little too normal!

      Delete
    5. Normal is in the eyes of the beerholder....

      Delete
  2. Thanks for the great layouts John. This site managed to get even better!

    ReplyDelete
  3. Looks a lot like... Electr... I mean... Lovepedal High Gain Twin?

    ReplyDelete
  4. Finished and boxed. Nice in the lower gain settings. A tad harsh at the highest gain. Crackle OK....

    Thanks for the layout John.

    ReplyDelete
  5. Built one yesterday, quite a nice simple little design actually. I feel that it really needs a master volume tagged on the output though as the higher gain settings can get too loud.
    Cheers
    Dave

    ReplyDelete
  6. I built this one too. Substituted bat41 diodes. It starts very slightly above unity and boosts a bit with the gain maxed. I don't hear a crackle in the gain knob, nor did I feel like there was a huge jump in volume. Maybe the diodes make a big difference. Anyway, going to drop it in a tiny, tiny box this week.

    ReplyDelete
  7. How is the LED connected w/ the mini version?

    ReplyDelete
    Replies
    1. Just connect the resistor inline with a daisy chain from the 9V supply, or if width isn't a problem for you, just add an extra column and put the resistor from the 9V row to one of the lower rows. Maybe the row that the transistor base is on, with a cut to isolate it obviously.

      Delete
    2. Hi.
      I have 1n60p's. Is the lit saying these are ok to use or not?
      I have the bat's alsao but wanted to stick as close to possible to the build.
      jeff

      Delete
    3. I often find that "non-stock" diodes work best for me than the stock ones. Use sockets and try different sets of diodes. BAT's will certainly work here although I often find they compress the tone too much and have quite a bit of a volume drop.

      Delete
    4. I always like the bat41 and 1n34a combination, or try bat 41 with 1n914 for more volume, dynamics and less clipping.

      Delete
    5. This really is a nice sounding pedal. I've been playing through it for the past few days and the more I play through it, the more I like it. I used bat 46s for the diodes.

      Delete
  8. This comment has been removed by the author.

    ReplyDelete
  9. Finished this build yesterday. Sounds really, really good. I'm really impressed with the voicing of this one considering all it has is the one knob. This is staying on the pedal board for awhile. I tried 1n34a, bat 41 and 1n914. Stuck with the 1n914's for now, but the 1n34a's sounded really nice too. Would be curious to hear it with the 1n60p's. Thanks for posting this! Great pedal.

    ReplyDelete
  10. Finished building one of these last night and tested it out. It sounded pretty good, but not as good as I was hoping. I hear a fizz like the transistor is getting clipped too much. So I pulled the diodes and I can hear the transistor clipping at times. I've tried a few different 2n3904 and one 2n2222a (figured I would give it a shot) and, as expected, some clipped more than others. So my question is this, for those who got this pedal sounding great, when the pedal is cranked can you hear the transistor clipping after pulling the diodes? Thanks

    ReplyDelete
    Replies
    1. I'm not really sure what is the problem you're describing... this is an overdrive not a (clean) booster. Clipping should be expected! :)

      Delete
    2. Haha, very true. I guess I'm wondering should the transistor just be boosting the signal (clean boost) so the diodes can do the clipping (overdrive sound), or is the transistor clipping and the diodes clipping? In the past I've had transistors clip too much and they made things sound fizzy. To fix it I changed the bias resistor to the collector so the transistor didn't clip as much, which I'm thinking about doing since this is DIY and I can do that sort of fun stuff.

      I will say that I forgot that I had used a 100n output cap instead of the 68n, since I don't have any 68n's at the moment. I put in a 56n cap in tonight and tried it out, and well...that helped a lot. So that's my story. And the moral of the story is, try stuff out and have fun making a lot of noise.

      Delete
    3. So I got some time to mess around with the circuit a little more. I socked the 10k resister going to the collector and tried out a 8.2k and 6.8k resistor. Both made a huge difference, but I opted to leave the 6.8k in there. I ended up changing the input and output caps for preference with my setup. And of course I've been playing around with the diodes. At this point the pedal is sounding quite excellent.

      Delete
  11. I don't know who John K is, but that's my layout. I posted it on FSB two months before the date shown on "his" layout. Not that it was terribly complicated, but it was the first RE and vero I ever did. I've gotten a lot of great info from this site IVIark, proud to see some of my own work on here.

    http://freestompboxes.org/viewtopic.php?f=7&t=15191&start=20

    ReplyDelete
    Replies
    1. Michael, cheers for you. I had seen your layout @FSB before being posted here, just didn't realize "Motter"and JohnK weren't the same people. Thnx for sharing.

      Delete
  12. Hay all... i can´t find the value of the "more" poti? someone can tell me? maybe i am blind...:\

    ReplyDelete
    Replies
    1. Yes I suppose it would help :o)
      It's 5K linear

      Delete
    2. Hey guys!
      I have limited parts selection and no patience ... :P
      What would happen with a 10K Lin in this position?

      Delete
  13. Hi there, I build mine a couple of hours ago. it works, kind of.
    Though the pedal is very quiet, at max even quieter than unity.
    Does anybody know what the problem might be?

    I used really cheap 1n34as as diodes which I got from the states.
    I tested every component before I built the pedal and they were fine.

    Somebody a hint?

    ReplyDelete
  14. Replies
    1. De-solder the bottom leads of D1 and D2 and see if the volume jumps up. If it does then the diodes are causing the problem, if not then it sounds like you could have a bad connection somewhere so you're going to have to go over your build and reflow solder as necessary. But as always with these things, we can't offer any advice without information, and that means you need to post the voltages you're getting at the transistor pins.

      Delete
  15. its the diodes,
    I gonna exchange them to 4148s

    thanks man

    ReplyDelete
  16. well, still doesnt really work, still a volme drop.
    here are the tranny voltages:

    C:4,3
    B:1,2
    E:0,5

    also, i dont here much of a difference when turning rhe pot up and down, is that normal?

    I gonna reflow my solder joints and see if it makes a diference

    ReplyDelete
  17. This comment has been removed by the author.

    ReplyDelete
  18. by reading this
    http://www.taitroncomponents.com/catalog/Datasheet/1N60.pdf
    i could say yes...but i'm not an expert...!!!

    ReplyDelete
    Replies
    1. I already saw that particular one, that is why I'm asking, I do not know what are the measures that matter...thanks anyways!

      Delete
  19. anybody?
    would it work the same 1N60 germanium diodes instead of 1N60P germanium ones?..thanks

    ReplyDelete
    Replies
    1. Any diodes will work fine, some will change the character of the distortion and the volume levels but they will all work. What sounds best is always subjective anyway so it's a good idea to test these things with a few and see what you think.

      Delete
    2. Remember that Ge's tend to lower the output and be warmer, while Si's tend to have more output and be more in your face. Checkout the demo video for the black arts pharaoh, and you'll see what I mean, because theirs a switch to choose between Si, Ge, and no diodes at all.

      Delete
    3. Many thanks.
      I can buy either just wanted to know what might be the difference between them, tI could not find the by unit, they come in fairly big packages, both are 50mA, the 1N60 is 50V the 1N60P is 45V. Would this extra 5V increase the gain somehow? This will be good to know, what is actually affecting what...

      Delete
    4. The extra capacity doesn't make a difference, these are just used to clip the signal and the important characteristic for that is the forward voltage which should be somewhere around 0.25 to 0.35V.

      Bear in mind that if the diodes look like this, then they're not germanium, they're schottky. The Ge 1N60 should look something like this

      Delete
    5. thank you very much Mark, one learn every day here!

      Yes them both I can get are germaniums.

      As the pdf shows, both have the same forward voltage curve (posted above by ξεναγός νεκρόπολης, http://www.taitroncomponents.com/catalog/Datasheet/1N60.pdf )

      I think I'll get the 1N60 here in Germany, the P version comes from HK, too much waiting time.

      Delete
    6. i know you said they're both Ge, but just be careful as there are a lot of schottky diode work-likes that are sold as Ge. They will have similar forward voltage, and will sound similar, but they are not. just be careful, because they're priced as Ge's but aren't. don't want to get ripped off, ya know?

      Delete
    7. hey johns many thanks, thats really sucks, actually now, after reading your post and watching Marks pics, they look more like schottkies to me: in HK http://www.ebay.de/itm/351175645964?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

      and in Germany
      http://www.ebay.de/itm/181524706345?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

      I've asked both sellers to confirm that they are authentic Ge's..no reply so far

      Delete
    8. without a doubt both of those are schottkys. that's not saying they sound bad, but you have to watch out. those are smaller DO-35 packages, and myself and others haven't found real Ge's in anything other than DO-7 packages which are larger. i just bought these:
      http://www.ebay.com/itm/171444646661?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

      but there all out. but i just found this from the same seller, which is less diodes:
      http://www.ebay.com/itm/20x-NOS-1N60-Germanium-Glass-Diodes-1K60-THOMSON-CSF-FOR-HI-END-AUDIO-/181411607746?pt=Vintage_Electronics_R2&hash=item2a3cf974c2

      Delete
    9. wow, I wouldn't buy stuff from suckers who tries to fool people! thanks so much for the heads up Johns! I know that guy in turkey I already bough some Roedenstein caps from him some time ago, cool dude.

      Delete
  20. i honestly don't think it's on purpose, just miss information along the way. think about it. it's the same part number, so its just kinda accepted. i've bought 1n34a work-alikes that sound fantastic, even better then the real thing IMHO that were sold as Ge's. i contacted the guy and he was shocked, cause his distributor sells them as Ge to him, so he's just selling them as he's informed. the guy changed his auction instantly and thanked me so he didn't get accused of ripping people off. you think that people selling would be more aware, but sometimes they don't, so we have to. btw, the work-alike 1n60p's do sound great, they just aren't Ge, so make sure you don't spend Ge money on them.

    ReplyDelete
  21. well I can say that I basically do think that there are so many sellers trying to fool people that the honest one are the exception, and that is in the everyday life in all aspects...
    you mean the 1N60P are not Ge in any case? just found some in Canada in DO-7 casing, wanted to get these..
    http://www.ebay.com/itm/New-IN60P-1N60-P-Germanium-Diodes-Crystal-Tube-Radio-25pcs-Black-LOOSE-/360879901665?pt=LH_DefaultDomain_2&hash=item54061e4be1

    ReplyDelete
    Replies
    1. those should be true Ge's, and the price is good. i'ld go for it.

      Delete
    2. I just did. thanks for all the help and tips johns!
      (the seller has confirmed and guaranteed these are legit Ge in big DO-7 casing)

      Delete
    3. hey, anytime buddy. want to make sure you don't make the same mistake many of us have made before. if we don't look out for each other, who will. hope you're build turns out the way you want it. can't wait to hear how it turned out.

      Delete
  22. Hi. there is a 1N4001 rectifier after the 100u electrolytic (coming from 9v) on this schematics (FSB) http://freestompboxes.org/download/file.php?id=24715&mode=view and on some guts pics too.
    There is none on your board, is it not necessary? thanks

    ReplyDelete
    Replies
    1. I never include parallel reverse polarity protection diodes, I think they're stupid when not used with a fuse. Apart from some very early layouts I always omit them.

      Delete
    2. This comment has been removed by the author.

      Delete
    3. This comment has been removed by the author.

      Delete
  23. What capacitor values would be good for bass guitar use?

    ReplyDelete
  24. I wanted to install a dpdt switch w/ 2 caps, the original and one to optimize for bass. is this the right tact, or should I be concerned with the input cap value too?

    ReplyDelete
    Replies
    1. that shouldn't be an issue at all. you want to use an On-Off-On DPDT, with one value on one side and the other on the second side. as for values, i'm not sure. this is based on an Electra Drive, and so is the Green Giant, both beeker and myself modified ours for bass and upped the input cap to 470nF, but in the Green Giant has a higher output cap of 100nF, so I would up the output cap to 100nF at least, in mine i upped the output cap to 470nF too.

      Delete
  25. so I couldn't just route a dpdt right off the board where the 68n cap goes, using a dpdt and a 68n and another larger value cap?

    ReplyDelete
    Replies
    1. I think a 470nF will be the best choice to use this pedal for a Bass. Both the input and the output caps. You should try other values. I do not know exactly if only changing the caps it will work 100%.
      Reply for us if you find some interesting results!!!

      Delete
    2. you can just replace the input cap with a switch(middle two lugs), on the top two lugs put one cap, and the bottom two lugs the other. if you want to do this for the output cap as well just use 2nd switch. since this is basically an electra distortion, which has been used for many pedals, one being what we call the germanium giant in the contributions section. in any event i built one for my bass all i did was swap the in a 470nF for input and output and it retained all the low end i needed, nothing else needed. don't forget you can go higher, or lower, or make them 2 different values to get something you like.

      Delete
    3. Thank you very much !

      It is more simple than I was thinking.

      I also pretend to develop in the future a switch to change the diodes clipping.


      thank you very much

      Delete
  26. I loved the sound of this pedal ! Amazing!

    But I am with "pop" sound when I turn on/off the devices.

    Should I increase the 1M input Resistor to ground ? Or does anyone have other idea?

    ReplyDelete
    Replies
    1. If the pop your getting is when you hit the stomp switch to turn the effect on and off, you can try upping the 1M pull down resistor. If it's happening when changing the caps when the effect is engaged that sometimes can happen.

      Delete
    2. It happens when I turned the effect on. I increased the puldown resistor to 5M and solved the problem!
      Thank you

      Delete
  27. Love this one! Made with Russian d9E 's. Sounds nice! Put in front of od-830 and sounds amazing!!!!

    ReplyDelete
  28. Hello,

    I tried to clip the signal with red Leds of 3mm and noting happened!

    I put in this way:

    Input row: two leds here which the + polarity goes to ground and -, of the second one, is going to output.

    From the output I put a third led as well. The - Goes to the ground.

    Did anyone tried clipping sound with leds?

    ReplyDelete
  29. Hey guys, first time builder first time commenter, I've literally just finished wiring everything up for this build, and haven't blown anything up yet (thankfully!) but when I engage the switch my volume drops below unity and I get a high pitched squeal, my signal remains clean though, even cranked I can't hear any signs of the speaker cranker grit that I've heard in the demos. Any idea on where I could begin to troubleshoot? Thanks in advance!

    ReplyDelete
    Replies
    1. I have a similar behaviour, how did you solve?

      Delete
  30. go through the fault finding section at the top menu bar. it goes through the basics of fault finding on tagboard. a continuity checker is your first tool you reach for after building.

    ReplyDelete
  31. How could I decresse the volume and increase the distortion ? Should I change which resistor?

    ReplyDelete
    Replies
    1. I was breadboarding this and messing around. The emitter/collector will change gain characteristics, but what I did was I sent the emitter to a 2n5088 transistor and set up similar resistors on the C and E to power/ground like the earlier one. This added some gain. I also added really weird random clipping diode arrangement off of B and C... Like, basically one diode was in the feedback loop while the other two went off on eachother into the ground, and this part added a fuzzy characteristic and changed the working on the pot significantly, to go between and overdrive and fuzz type sound.

      If this is one of your first projects I highly reccomend breadboarding it and messing around if you have some extra trannies/diodes.

      I think I burnt one tranny up trying to mod my perfect clipping arrangement lol...

      Delete
  32. Will either a 10k or 2k lin pot work for this? Closest I have in the drawer at the moment.

    ReplyDelete
  33. This comment has been removed by the author.

    ReplyDelete
  34. You could put a 10K resistor in parallel with the 10K pot to halve the resistance to 5K

    http://www.geofex.com/article_folders/potsecrets/potscret.htm

    ReplyDelete
  35. Just built this - worked first time. Nice.

    ReplyDelete
  36. hi.
    jusr bread boarded, pedal sounds really so nice.
    i have replaced 68n cap with .47 and it soundes better to my ears, nice with humbuckers very nice tone.

    ReplyDelete
  37. Anyone else picking up the high freq squeal when using a power supply?
    Its silent when using a battery and with high quality power supply. But shouldnt it be silent with regular boss psa ps as well??

    ReplyDelete
    Replies
    1. Yes. This effect just doesn't seem very tolerant of noisy power supplies. Mine wails like a banshee when plugged into a cheap wall-wart (it's daisy-chained with a rat, which doesn't complain); but works beautifully on a battery. This afternoon I built a perf version of this: https://shop.pedalparts.co.uk/Hum_Stop_-_power_supply_hum_reducer/p847124_6807259.aspx and added it to the power jack, and this reduced the squealing to a fairly quiet hum. This isn't a bad workaround, but if you've got a high quality power supply I'd recommend just using that with this effect...

      Delete
  38. Totally new to pedal building and I'm sourcing the parts for this as my first build. Looking for 1N60P's and all I'm finding is "schottky"'s. I know squat about electronics, so I'm confused - are the specs for this pedal for Germanium or Schottky diodes? Are they interchangeable? Thanks guys!

    ReplyDelete
  39. Hi,
    Is this circuit tuned for guitar only, or would it work fine with a bass too ?
    Would increasing the 100nF and 68nF capacitor make it more "full spectrum" and bass friendly ?

    ReplyDelete
  40. (Sorry, I just realized it had been already replied above)

    ReplyDelete
  41. "I socked the 10k resister going to the collector and tried out a 8.2k and 6.8k resistor. Both made a huge difference"
    > In which way did it change the sound ?
    > Could we use a 10K pot instead (if so, how shuold we solder the 3 lugs) ??

    ReplyDelete
  42. So easy to make and sounds great, even with cheap Chinese parts!

    ReplyDelete
  43. Put it into a 1590A and it's gorgeous! Great for edge of breakup and gets kinda vintage fuzzly when set high.

    With my old Boss power supply I get a high pitched squeal but with mir Palmer PWT12 it's silent.

    Thanks for the layout, you guys are great!

    ReplyDelete
  44. Successful build, no substitutions. Pick an LED you really like, because it'll always be on. Thanks, Mark!

    ReplyDelete
  45. Sounds excellent with simple bat 46’s. Bread boarded it first. Found something huge sounding to go into a 1590a. Beat out a Ritual fuzz. Thanks!

    ReplyDelete
  46. Any chance of getting a tagboard layout of this one? I love mine!

    ReplyDelete