Wednesday, 30 March 2016

Madbean Turnabout (JHS Andy Timmons)

Brian's take on JHS Andy Timmons pedal.
This is not an exact clone of the original circuit and the video is for reference only:



26 comments:

  1. Is there any thread to reference Brian's changes/choices? Just curious.

    ReplyDelete
  2. Is he plugged right into a recording interface, or a guitar amp? Does it have speaker emulation?

    ReplyDelete
    Replies
    1. NM - I saw the $2000 Imperial amp flash on the screen for a second.

      Delete
    2. He actually sends the Imperial through the two notes torpedo live. So you're hearing the Imperial through a speaker simulator. I know he uses an IR based on a Tone King cab.

      Delete
  3. Used a NE5532 and works great. Gonna experiment with some other IC's. Thanks for all the great info!!

    ReplyDelete
    Replies
    1. TL072 rips in this. Keeper for sure. RAWK!

      Delete
  4. Haha! Now I get the irony of the name. It's a copy of a copy:) I like the subtle jab, "it sounds good (like the Crunchbox)."

    Thanks to Alex for keeping this site very vital and giving us builders some new challenges to sink our teeth into:)

    ReplyDelete
  5. Hi.
    I was talkin to an emplyee of mine the other day and he asked why I would have 4 or 5 distortion/drive/fuzz pedals on my effects board. Can someone explain what he meant? Soooo many pedals. So little time!!

    ReplyDelete
    Replies
    1. "why I would have 4 or 5 distortion/drive/fuzz pedals on my effects board..."

      Why does an artist have 20 colors of paint on his/her palette? Can't we just use two or three colors? Likewise for effects pedals. Heck, there are nearly 300 different fuzz pedal projects on this site!

      Delete
  6. Anyone getting excessive noise with this circuit? The switch and pots all work as expected but I'm getting loads of excessive background noise.

    ReplyDelete
    Replies
    1. Johnny, im getting tones of noise, its even Lauder than the effect! Hahaha did You found out what was the problem? Thanks in advance

      Delete
  7. Played around with this one and settled on TL072 and ITT 425 diodes. Don't know anything about these diodes but of all the different diodes and LEDs i have these sounded the best. I do get some background noise but its minor.

    ReplyDelete
  8. Built this and really like the range of sounds and clipping options. I did put a 330p across the led clippers to tame some fizzle on the decay.

    ReplyDelete
  9. This comment has been removed by the author.

    ReplyDelete
  10. What's the green circle on the right of pin 4 of the IC?
    Thanks

    ReplyDelete
    Replies
    1. that's a double link. so when you're building it you'll have 2 links in 1 hole. so you have one link from the right of the 100nF cap on row 6 to under pin 4 of the IC, then another from under pin 4 of the IC to the row below.

      Delete
  11. I think the 220nF cap at the bottom is not supposed to connect to the bottom row, it is supposed to connect to ground, which is the row just above the bottom. (according to the Madbean schematic) He calls it C4 in the schem. Otherwise it looks right.

    ReplyDelete
    Replies
    1. Hi Michael.
      The layout has already been verified.
      The 220n cap (C4) goes from the 1K resistor to ground (there is a link under the IC pin 4)

      Delete
    2. Yep. I see it now. Thanks. Pedal sounds great - thanks again for the layout.

      Delete
  12. This comment has been removed by the author.

    ReplyDelete
  13. Very nice pedal! I used to say that the Suhr Riot was the best od/distortion pedal in such a small format as far as handmade is concerned, but the JHS AT(madbean version), is really better!

    Here is my build!
    Will post samples later

    http://hgecontraptions.blogspot.ro/2016/05/built-jhs-andy-timmons-pedal-clone.html

    ReplyDelete
  14. This is one of the greatest pedals, I ever built and tried. The different diode configuration switch is awesome.

    ReplyDelete
  15. I want to build this pedal but i don't have an on/off/on switch .i have a few on/on mini switches kicking around .how would i use them or just the one ...

    ReplyDelete
  16. I'm trying to build this and there is no sound coming out from it, can someone help me to understand what may be the problem here. Followed exactly the diagram and checked it multiple times. Would it be the LM833P that I'm using?

    ReplyDelete