Sunday 14 February 2010

Alembic Stratoblaster

12 comments:

  1. Hey, I built this and it works great apart from the pot does everything in the last bit - think it should be a linear 50k and I used log...

    Fantastic sounding little boost though! :)

    ReplyDelete
  2. ..turns out its a 50k reverse taper! :)

    ReplyDelete
  3. Thanks for the feedback and glad you're getting some use out of these.

    ReplyDelete
  4. Hi this is going to sound super stupid but to the diagram above which way do the tracks of the board go
    Thanks Gregg

    ReplyDelete
    Replies
    1. The board has no tracks, it's tagboard so all the connections are made by the components, links and wire to pots.

      Delete
    2. Thank you. I knew my question was stupid

      Delete
  5. http://i1318.photobucket.com/albums/t652/ziotasgiorgos/Stratoblaster%20Vero_zpsqitau96z.png

    ReplyDelete
    Replies
    1. Your vero layout looks wrong, the bottom left 22k should be 100k and you're missing a cut under 10uf.

      Delete
  6. I just built it, it's a beast how brutal it is..except I used mosfet 2SK152 instead of J201, it's probably best replacement.. I'm totally shocked, didn't expect that will be this good, thank you

    ReplyDelete