Friday, 25 January 2013

BBE Green Screamer

The Green Screamer is an overdrive pedal that produces a dynamic range of smooth and warm overdrive tones associated with vintage tube amps. Robust build quality and rugged engineering ensure that the Green Screamer will stand up to the abuse of life on the road. Other features include hardwire bypass, LED operation indicator, non-slip rubber bottom, easy-access 9v battery compartment and included external power supply.






Posted by at 22:02
Tags: , , ,

12 comments:

  1. Madferret30 January 2013 at 19:16

    Verified, and can I add that this is the first circuit that has actually caused me bodily harm to verify. I managed to stand on an upturned IC that decided that the sole of my foot would work quite nicely as a socket. I'm surprised no-one heard me swearing.

    Anyway, back to the layout. It's quite a nice 60's/70's rock sounding OD, not bad for how easy it is to build. The drive pot wires are back to front though and if anyone is using an electrolytic cap for the 1uf negative goes to Vol 3.

    ReplyDelete
    Replies
    1. mirosol30 January 2013 at 19:26

      :DDD

      Thanks Madferret! I'll tag it right away!
      +m

      Delete
  2. Mojo32115 October 2013 at 16:28

    My buddy has an original. I modified it for him and it sounds awesome! I used a NE5532. He uses a power supply, so the 6mA draw was worth it. Also, I swapped the 100nF out and put in a 470nF in it's place for a bit more beef. Also, swapped one of the diodes to an LED for asymetrical clipping. That brightened it up and increased output, which kinda balanced back out with the 470nF cap. I like it. My suggestion on this build is to socket the diodes, and the 100nF cap so that you can play with the three. I saw a post somewhere that a guy used 1uF for the cap and thought it was too bassy, but the 0.1uf lost too much bass. That's why I went with the 470nF. Regards,

    ReplyDelete
  3. Unknown12 February 2014 at 12:24

    Built this today. It's just a louder TS9/808. That really is all there is to say about it.

    ReplyDelete
    Replies
    1. Unknown12 February 2014 at 12:25

      And Madferret is right, the Gain pot needs flipping.

      Delete
    2. IvIark12 February 2014 at 12:55

      Thanks mate, I thought I'd done this. Doh!

      Delete
  4. Unknown8 August 2015 at 14:29

    J'ai pas de resistor 2k15 . Que mettre ...Thank

    ReplyDelete
    Replies
    1. Unknown8 August 2015 at 14:37

      This comment has been removed by the author.

      Delete
    2. Tsaddeous8 August 2015 at 18:21

      2k ou 2,2k peuvent faire l'affaire, sans problème.

      Delete
  5. Unknown8 August 2015 at 18:05

    No résistors 2,15 K , to replace by ? ... merci

    ReplyDelete
  6. Unknown9 August 2015 at 09:25

    Merci Tsaddeous !

    ReplyDelete
  7. Unknown9 August 2015 at 09:26

    J'ai mis du 2k7

    ReplyDelete

Subscribe to: Post Comments (Atom)