Here's a collection of vero (stripboard) and tagboard guitar and bass effect layouts that we have put together covering many classic and popular effects in growing numbers. Many of these have been posted on freestompboxes.org, so check that site out for great discussions on building your own effect pedals. Enjoy the builds and please also visit us on Facebook and Twitter
a couple quick questions about this one. what is the anode/cathode orientation of the LEDs, and for the mid boost, it says to swap a 100n for the 470n, should that read 47n, or is the 47n in the layout supposed to be a 470n? thanks for all your help, you rock.
The LEDs should be top to tail, it doesn't matter which is which just make sure you have one each way. The cap to change is the 100n at the bottom left. If you imagine the 2 postion DPDT switch lugs being like this:
1-4 2-5 3-6
If you leave the 100n off the board completely, you could put it and a 470n across the outer lugs of the switch, one between 1 and 4, the other between 3 and 6. Then take wires from where the 100n connects in the layout and take those to lugs 2 and 5. Then you can switch between them both.
yo iviark! i built this layout but with some changes to match the bearfoot drd schematics posted over the web. and it sound awesome!! ive built the orig bjfe drd and i dun really like that. but this one it sound an improvement!
you should consider make a layout for bearfoot drd. Thanks for the layout
Good morning.. i've a problem with this kit.. the sound is great, but the volume is not very powerfull...today I'm trying to change the 100n capacitor for mid boost..
a couple quick questions about this one. what is the anode/cathode orientation of the LEDs, and for the mid boost, it says to swap a 100n for the 470n, should that read 47n, or is the 47n in the layout supposed to be a 470n? thanks for all your help, you rock.
ReplyDeleteThe LEDs should be top to tail, it doesn't matter which is which just make sure you have one each way. The cap to change is the 100n at the bottom left. If you imagine the 2 postion DPDT switch lugs being like this:
Delete1-4
2-5
3-6
If you leave the 100n off the board completely, you could put it and a 470n across the outer lugs of the switch, one between 1 and 4, the other between 3 and 6. Then take wires from where the 100n connects in the layout and take those to lugs 2 and 5. Then you can switch between them both.
cool. that makes a lot of sense. thanks again. i'll let you know how it turns out.
Deleteyo iviark! i built this layout but with some changes to match the bearfoot drd schematics posted over the web. and it sound awesome!! ive built the orig bjfe drd and i dun really like that. but this one it sound an improvement!
ReplyDeleteyou should consider make a layout for bearfoot drd.
Thanks for the layout
OK I'll do the changes and add a Bearfoot version. But you used this layout? Just checking that the actual layout is now verified. Cheers
DeleteFriends, do you know if this is the same circuit of mad professor mighty red distortion?
ReplyDeleteNo, the Mighty Red is a very different circuit. Source: the actual pedal designer https://www.freestompboxes.org/viewtopic.php?t=1058
DeleteGood morning.. i've a problem with this kit.. the sound is great, but the volume is not very powerfull...today I'm trying to change the 100n capacitor for mid boost..
ReplyDelete