Pages

▼
Showing posts with label Ibanez. Show all posts
Showing posts with label Ibanez. Show all posts
Thursday, 24 December 2015

Ibanez NB-10 Noise Buster

›
Original info: Unlike conventional noise gates, the IBANEZ NB 10 Noise Buster is capable of cutting out noise not only while there is no s...
43 comments:
Monday, 15 September 2014

Ibanez BB9 Bottom Booster

›
Here we go with one of my personal favourites. To me, the sound is simply amazing. As Dirk's notes on the schematic suggest, you won...
23 comments:
Sunday, 27 July 2014

Ibanez JD9 Jet Driver

›
And here are the working voltages from ξεναγός. Q1 - B 2,65 - C 8,67 E 3,06 Q2 - B 2,71 C 8,67 E 3,1 IC1 - 1- 4,27 2- 4,34 3- 4,32 4...
13 comments:
Thursday, 19 June 2014

Ibanez SD9M Sonic Distortion Mod

›
There are two dual opamps, and one half of the other is completely unused in the original. So i used the remaining half as a buffer for the ...
34 comments:
Tuesday, 21 January 2014

Ibanez TS808 with Bass Control

›
Request.  This layout adds a Timmy type bass control to the TS808 (but with the lugs swapped round so bass increases as you turn clockwise) ...
57 comments:
Sunday, 29 December 2013

Ibanez Standard Fuzz

›
No way we're going to beat last year's number of layout posts :) We might break the verified 600 before new years though :) Since ...
17 comments:
Thursday, 17 October 2013

Ibanez CR5 Crunchy Rhythm

›
As requested. I happen to have an original unit in metal enclosure, and to my ears this is definitely one of the greatest Ibanez overdriv...
6 comments:
Tuesday, 15 October 2013

Ibanez BS10 Bass Stack

›
There you go John. We'll never have enough bass designs... This one is basically a Rat for bass. Thanks to John, this one is now verif...
19 comments:

Ibanez LM7 L.A. Metal (layout v2)

›
Another redux drawn from Dirk's schematic..
Monday, 14 October 2013

Ibanez FC10 Fatcat (layout v2)

›
Ok. As the original layout for this circuit was originally drawn from a bad schematic and altered later, i thought it would be a good idea t...
4 comments:
Monday, 26 August 2013

Ibanez OD855 Overdrive II

›
Now. This is per the factory schematic, so it should (finally) be ok - don't go looking for the old defunct layout, as it is gone for go...
18 comments:
Sunday, 25 August 2013

Ibanez Overdrive II / Dirt Box

›
  This layout is for the original Overdrive II, not OD-855. The same circuit has been sold as "The Dirt Box" too. More interes...
11 comments:
Sunday, 14 July 2013

Ibanez MSL Metal Screamer

›
I think we've done all the Ibanez Tubescreamers now :P This one is a mix between TS10 and TS808 with slightly bigger cap for fatter bass...
10 comments:

Ibanez ST9 Super Tubescreamer

›
Very close to STL Super Tube. Clipping amp and mids boost section are in different order, plus some slight changes to the buffers. ...
11 comments:
Thursday, 11 July 2013

Ibanez TS7 Tubescreamer

›
200th Overdrive layout! I seem to be on the streak with Tubescreamers. This one also marks a special moment. In addition to this being 200t...
12 comments:
Wednesday, 10 July 2013

Ibanez TS9DX Turbo Tube Screamer

›
This puppy is basically another TS9, but it has clipping and gain options on "mode" switch. Modes are TS9, +, Hot and Turbo. Latte...
14 comments:

Ibanez TS5 Tube Screamer

›
Hehee! Couldn't help myself. It is in reality a TS9 :) If you want it 1:1, then use TA75558 and 2SC1815 transistors (mind the pinout!)....
12 comments:
Sunday, 16 June 2013

Ibanez STL Super Tube

›
Doron! I think you meant this one and not the MSL :P To add a few words, the clipping diodes are placed neatly where you can easily take t...
9 comments:
Saturday, 15 June 2013

Ibanez TS10 Tube Screamer

›
Edit 31.7.2016 - There was still one crucial error on the layout, which made the board defunct. Fixed and tweaked a few things a...
59 comments:
Tuesday, 28 May 2013

Ibanez CM5 Classic Metal

›
Got the original yesterday and it didn't disappoint. Soundwise. The box is what you'd expect and the stompswitch is out of order, so...
17 comments: