Guitar FX Layouts

Here's a collection of vero (stripboard) and tagboard guitar and bass effect layouts that we have put together covering many classic and popular effects in growing numbers. Many of these have been posted on freestompboxes.org, so check that site out for great discussions on building your own effect pedals. Enjoy the builds and please also visit us on Facebook and Twitter

Pages

▼

Showing posts with label Charge pump. Show all posts

Showing posts with label Charge pump. Show all posts

Tuesday, 5 January 2016

Switchable Onboard Power +9/+18V

Awhile ago I saw someone asking adding an +18V inverter to a board and the differences it made in some pedals, as well as what they need to ...

Wednesday, 26 February 2014

Keeley Katana Boost Layout Rev 2

alphadog808 was having problems with his Katana Boost build and I noticed one of the cap values was incorrect. I also noticed that I had no...

Tuesday, 7 January 2014

Providence Stampede OD SOV-2

And this is the one I did the bipolar voltage converter for! :o) This pedal uses a 9V supply which is then converted to +/-15V using a 5V...

Monday, 6 January 2014

Bipolar Voltage Converter

This will be a useful little circuit for anyone wanting voltage doubling and negative voltage from a single charge pump. I've done this...

Saturday, 27 April 2013

Catalinbread DLS MKIII

I didn't think it would end up too big, so I thought I'd jump straight in at the deep end and do a modified version with additional ...

Wednesday, 13 February 2013

NE555 Voltage Inverter

Here's a cheaper-to-build alternative for MAX1044/ICL7660 voltage inverter charge pump. According to the documentation, this puppy is ca...

NE555 Voltage Doubler

Here's a cheaper-to-build alternative for MAX1044/ICL7660 voltage doubler charge pump. According to the documentation, this puppy is cap...

Monday, 28 January 2013

ARC Effects B3

This is ARC Effects take on the Burns Buzzaround with a negative voltage inverter to provide -9V to allow you to maintain a daisy chainable ...

Monday, 24 September 2012

Madbean FatPants 2012

Madbean's take on the EP Pre-amp. Info from Brian about his design: The FatPants design began as an alternative to the “pedalized” ver...

Saturday, 22 September 2012

Anderton Super Tone Control

I think this will be popular with quite a few people, especially those who want to get the most of their dirt pedals and fine tune the frequ...

Friday, 14 September 2012

OKKO Diablo - Modded Monster Pot Edition

Request. A modded version of the Okko Diablo with pots replacing the onboard trimmers and scope for even more! This will give you an 8 kno...

Friday, 4 May 2012

Negative Voltage Inverter

I've done a few layouts using this method, but thought it may be useful to include a little daughter board which will allow you to easil...

Monday, 30 April 2012

Boob Tube V1.5

There have been a few requests for tube based pedals and this is one I did previously. Based around JuanSolo's 12V Boob Tube which is a...

Monday, 19 March 2012

Tone Bender MkII - PNP with negative ground

Request. This will allow you to use the better quality PNP germanium transistors, but keep a negative ground so it can be daisy chained wit...

Thursday, 23 February 2012

Xotic EP Booster - Briggs Modded

Requested. This is a modified version of the Xotic EP Booster, done by Fred Briggs and seen on his blog La Révolution Deux . Have a look a...

Monday, 20 February 2012

ROG Supreaux Deux

Runoffgroove's stompbox emulation of the old Supro 16T amps and so potentially a good one for the BJF Honey Bee fans. This one needs 18...

Monday, 13 February 2012

Klon Centaur

[Updated 4th July 2014 - correction to treble control resistors] Note: A new revision of the Klon layout has been done which is smaller a...

Friday, 3 February 2012

Keeley Katana Boost

Layout updated. If you want to build this now I would suggest you build this version http://tagboardeffects.blogspot.com/2014/02/keeley-k...

Thursday, 2 February 2012

ColorSound SupaSustain

This one needs an 18V supply, so use a dedicated supply, two batteries, or you could build up the 9V to 18V converter that I've posted h...

Saturday, 13 November 2010

Fuzz Face PNP negative ground with simple bipolar power supply

This one will let you continue to use the more consistent PNP germanium transistors, but the charge pump will provide a -9V supply, so the g...

View web version

Powered by Blogger.