Here's a collection of vero (stripboard) and tagboard guitar and bass effect layouts that we have put together covering many classic and popular effects in growing numbers. Many of these have been posted on freestompboxes.org, so check that site out for great discussions on building your own effect pedals. Enjoy the builds and please also visit us on Facebook and Twitter
Pages
▼
Tuesday, 13 December 2022
Caline CP-29 White Heat
Boost with grit. Basic, but not exactly like all the others out there.
It's B100K in the schematic, while it seems to be A100K on the board photos. In that position on a design like this, i don't think the taper matters too much. But sure. It's logarithmic in the original unit. +m
Just built this and seems to work as expected, as its say a boost with a bit of grit, using A100K for both pots as didn't have any B100K, but that should not make much difference, so I would say you can mark this verified.
Any reason why levels B100K? It's listed as A100K on the PCB.
ReplyDeleteIt's B100K in the schematic, while it seems to be A100K on the board photos. In that position on a design like this, i don't think the taper matters too much. But sure. It's logarithmic in the original unit.
Delete+m
Just built this and seems to work as expected, as its say a boost with a bit of grit, using A100K for both pots as didn't have any B100K, but that should not make much difference, so I would say you can mark this verified.
ReplyDelete