Pages

▼

Thursday, 22 September 2016

Madbean Tapanator Projects

Here are some great new Tap-Tempo projects by Madbean.
I prefer to add them all in the same post because they are meant to work together.
You could use 1/8" jack & plugs.
You can find all info and his great (and cheap!) PCBs on his website here.
The TapLFO is available from SmallBear here.






at

13 comments:

  1. Hozy3122 September 2016 at 18:57

    Nice one Alex! Definitely on the build list. I have left a post in Friends Market if anybody in the UK/EU wants some TapLFO chips as i have some excess.

    ReplyDelete
    Replies
    1. Alex22 September 2016 at 19:54

      I've forgotten! Got one from you a while back (still didn't find the time to use it)! These look like great projects.
      (On another subject: did you check my Triumvirate post about the 10uF cap?)

      Delete
    2. Hozy3123 September 2016 at 13:21

      Yes, just responded to that. Thanks for that.

      Delete
  2. Hozy311 October 2016 at 19:19

    Built the Tapanatorator and the Trem so far and must say that it sounds awesome. Have built the boards for the Wah & Phaser but need to wire them up. For LDRs i used GL5528s for the tremelo and they sound great, dead cheap as well from Evilbay. Verify the others tomorrow. Cheers Alex.

    ReplyDelete
    Replies
    1. Hozy312 October 2016 at 17:24

      Wah and Phaser verified also! Great project this. Might still get the PCBs from Madbean and fit all three into a reasonable sized enclosure. Again used GL5528s for LDRs and they sound really good.

      Delete
    2. Alex3 October 2016 at 14:42

      Thanks Gavin!

      Delete
  3. PMowdes16 November 2016 at 22:18

    This comment has been removed by the author.

    ReplyDelete
  4. PMowdes21 November 2016 at 12:08

    I've got the tapanatorator, the tremolo and the wah running(and they are sweet!!), but still having a little trouble with the phaser.

    ReplyDelete
  5. PMowdes21 November 2016 at 12:08

    Awesome work btw Alex :)

    ReplyDelete
  6. KT4 January 2017 at 16:26

    The tap out, can it be used for CV in for pedals with a cv input?

    ReplyDelete
  7. ferdinandstrat15 July 2017 at 19:24

    Lets say I just want one external output, can I eliminate the bottom three rows?

    ReplyDelete
  8. Unknown26 July 2018 at 19:29

    Does anyone have a demo where only the wah is heard?

    ReplyDelete