You can find the original FSB thread here.
I've used Pedalgrinder slightly modified schematic on page 3.
Some suggested high gain, some low gain transistors.
Should test them both.
... and the LM13700's version:
Tuesday, 27 September 2016
Electro Harmonix Black Finger Compressor/Sustainer
Here is a layout for the older version of EH Black Finger.
You can find the original FSB thread here.
I've used Pedalgrinder slightly modified schematic on page 3.
Some suggested high gain, some low gain transistors.
Should test them both.
... and the LM13700's version:
You can find the original FSB thread here.
I've used Pedalgrinder slightly modified schematic on page 3.
Some suggested high gain, some low gain transistors.
Should test them both.
... and the LM13700's version:
I built the 3080 version. It works and gets very distorted with the sustain all the way up. It's not a bad thing as it sounds like a great overdrive. I had one of the vintage units and seem to remember it sounding similar, but maybe not quite as much distortion.
ReplyDeleteThe original is distorted as hell. I had two, one powered by TWO 9v batteries. "Distortion less sustain" it said. Yeah, right..
ReplyDeletehttps://masutopedals.wordpress.com/2016/06/30/electro-harmonix-vintage-black-finger/
Hi guys,this vero is still unverified?
ReplyDeletehttps://www.ehx.com/forums/viewthread/7380/#37146
Deleteif ya wanna check for yourself, or register at freestompboxes.org and check the thread in the original post.
This comment has been removed by the author.
ReplyDeleteI built the LM13700 version and it works, but I think tone 1,3 and sustain wires are the wrong way around (wrong on FSB schematic too).
ReplyDeleteI've built it for someone who used to own it back in the day so I'll report back when they've used it and can confirm.