You can find original thread and schematic here.
The layout has already been verified by Gavin (Hozy31).
Gavin said: "It seems biasing the drain to 4.5v is not the way to go. You need to turn it until you get decent volume on all switch 2 positions"
Monday, 25 July 2016
Rockett Flex Drive
Here is a layout for the Rockett Flex Drive.
You can find original thread and schematic here.
The layout has already been verified by Gavin (Hozy31).
Gavin said: "It seems biasing the drain to 4.5v is not the way to go. You need to turn it until you get decent volume on all switch 2 positions"
You can find original thread and schematic here.
The layout has already been verified by Gavin (Hozy31).
Gavin said: "It seems biasing the drain to 4.5v is not the way to go. You need to turn it until you get decent volume on all switch 2 positions"
Dịch vụ nhận đặt hàng trung quốc theo ký chi phí rẻ nhất.
ReplyDeleteMua hàng hộ từ trung Quốc về Việt Nam
Nhận Đặt Hàng Quảng Châu Tính Trọng Lượng Giá Cả Rẻ Nhất.
ship hàng quảng châu tính trọng lượng giá cả thấp nhất.
Công ty nhận đặt hàng trung quốc
Thank you for the article. It's really nice and useful.
ReplyDeletemetering and dosing pump manufacturer in india | dosing pump manufacturer in india | chemical dosing system | water treatment equipments | chemical dosing system
This pedal looks interesting... i'll try to built it next week.
ReplyDeleteCan I use 1N4007 or 1N4008 diodes? Have they very different sound?
4580D is I think JRC4580D but I have NJM4580D. Are these the same or very very similar chips?
Thanks in advance for reply.
How do I measure the stresses of the J201
ReplyDeletewith multimeter?
http://tagboardeffects.blogspot.co.uk/2012/07/greatly-improved-jfet-matcher.html
DeleteWith multimeter?
ReplyDeleteI put a tip in the D
transistor and the other at + 9V?
Xem thêm : nuoc hoa kich duc
ReplyDelete