Here's a collection of vero (stripboard) and tagboard guitar and bass effect layouts that we have put together covering many classic and popular effects in growing numbers. Many of these have been posted on freestompboxes.org, so check that site out for great discussions on building your own effect pedals. Enjoy the builds and please also visit us on Facebook and Twitter
Pages
▼
Wednesday, 30 March 2016
Madbean Turnabout (JHS Andy Timmons)
Brian's take on JHS Andy Timmons pedal.
This is not an exact clone of the original circuit and the video is for reference only:
He actually sends the Imperial through the two notes torpedo live. So you're hearing the Imperial through a speaker simulator. I know he uses an IR based on a Tone King cab.
Hi. I was talkin to an emplyee of mine the other day and he asked why I would have 4 or 5 distortion/drive/fuzz pedals on my effects board. Can someone explain what he meant? Soooo many pedals. So little time!!
"why I would have 4 or 5 distortion/drive/fuzz pedals on my effects board..."
Why does an artist have 20 colors of paint on his/her palette? Can't we just use two or three colors? Likewise for effects pedals. Heck, there are nearly 300 different fuzz pedal projects on this site!
Played around with this one and settled on TL072 and ITT 425 diodes. Don't know anything about these diodes but of all the different diodes and LEDs i have these sounded the best. I do get some background noise but its minor.
that's a double link. so when you're building it you'll have 2 links in 1 hole. so you have one link from the right of the 100nF cap on row 6 to under pin 4 of the IC, then another from under pin 4 of the IC to the row below.
I think the 220nF cap at the bottom is not supposed to connect to the bottom row, it is supposed to connect to ground, which is the row just above the bottom. (according to the Madbean schematic) He calls it C4 in the schem. Otherwise it looks right.
Very nice pedal! I used to say that the Suhr Riot was the best od/distortion pedal in such a small format as far as handmade is concerned, but the JHS AT(madbean version), is really better!
I want to build this pedal but i don't have an on/off/on switch .i have a few on/on mini switches kicking around .how would i use them or just the one ...
I'm trying to build this and there is no sound coming out from it, can someone help me to understand what may be the problem here. Followed exactly the diagram and checked it multiple times. Would it be the LM833P that I'm using?
There's something wrong in the Mosfet clipping section: another BAT41 Schottky diode is needed for the second 2N7000 as well (like in the Zen Drive clipping section), otherwise you get too an asymmetrical clipping (more than 2.0V for the side with the BAT41, only 0.6V for the side without it)
well i think that d4 is also linked to the 2n7000 on the left i guess its still assymetrical because 2 are connected to the left mosfet . anyone else want to chime in?
Hi, I think the clipping section is not correct or badly designed, is it pisible? Do you think it is correct? I think this layout has been plotted based on this scheme:
but I think the clipping section is poorly drawn. I think the switch should switch between 2 options: -clipping 2 red leds or -clipping zendrive style, right? I think he's not doing it like this , is it right or am I wrong?
Hi there, I just build this awesome Pedal, it does really sound awesome, but here is the Problem, it is kind of extremely loud, so if I kick in this Pedal, I can't turn up the volume past 9 o'clock because it then is way to loud, and also if I turn up EQ or Air it is getting louder, maybe that is supposed to happen, but if I turn up EQ and Air fully, I can't get any unity Volume anymore, its always louder or of Any Idea what it could be?
Just built it, and after missing a cap, 3 links, and sticking something in the wrong hole (yeah, that's what she said) I finally got this working. Sounds pretty good, but I'm a little underwhelmed. My LEDs don't light up, unlike my crunchbox, and it doesn't seem to have as much dirt (as my crunchbox).
Thats A bit strange, the led's should light up when the toggle switch is set to the middle position. Maybe you've burned one of the transistors or the IC? Mine is quite gaini :D
Build it and works great, first take on the lm833 and it seems a good chip for drive pedal, tons of gain comes out, and a bit louder when the leds clipping switched, maybe I used Bat85 instead of bat41 cause it.. but it still great for me, thanks for layout and here some record shots for share: https://photos.app.goo.gl/axTYcKRjdFw1jfD53
Got this up and running, upped the gain pot to 500k though, Might look at a different taper though as rolling the gain off also rolls the treble and the gain is bunched up at the end.
Elijah-Baley, I just received an online order package of box film caps and other parts. It's for this build and another. This might be off topic but a capacitor with markings U10nJ2A was included. The "u" was kinda written very small like a superscript. Do you or anyone here know the value of this capacitor? Didn't get any result in google too and tried to contact the seller but didn't get any reply.
Is this an extra cap you not included on your order? Anyway, it seems pretty clear: "10n" should be the value, 10nF. The "J" means it has a 5% of tolerance. Good enough. This is what I know.
Oh that makes sense now. I ordered a bunch of 103J (10nF) and was too lazy to count. Didn’t know they were lacking 10 or so caps. Must’ve run out of stocks with the 103J markings. Thanks man and sorry to Alex for high jacking his post.
If "this is not an exact clone of the original circuit" what's the difference with the original one? I know that the original JHS is the same of the Crunch Box, but the JHS should have a 100nF in parallel with the 22nF to the ground in the tone section. (Somebody said that cap there was none). I see a 1uF cap instead of a 2.2uF. Anyway, the most important thing I wannt to get is: LED and the BAT41 clipping should be confirmed, but what about the central position of the clipping switch? Mosfet or no diode mode?
I just finished it and it's fine, but I'm surprised that it has little volume, I don't know if it happened to someone else and can give me some clue. Thank you!
Is there any thread to reference Brian's changes/choices? Just curious.
ReplyDeleteIs he plugged right into a recording interface, or a guitar amp? Does it have speaker emulation?
ReplyDeleteNM - I saw the $2000 Imperial amp flash on the screen for a second.
DeleteThat'll do it.
DeleteHe actually sends the Imperial through the two notes torpedo live. So you're hearing the Imperial through a speaker simulator. I know he uses an IR based on a Tone King cab.
DeleteUsed a NE5532 and works great. Gonna experiment with some other IC's. Thanks for all the great info!!
ReplyDeleteTL072 rips in this. Keeper for sure. RAWK!
DeleteHaha! Now I get the irony of the name. It's a copy of a copy:) I like the subtle jab, "it sounds good (like the Crunchbox)."
ReplyDeleteThanks to Alex for keeping this site very vital and giving us builders some new challenges to sink our teeth into:)
Hi.
ReplyDeleteI was talkin to an emplyee of mine the other day and he asked why I would have 4 or 5 distortion/drive/fuzz pedals on my effects board. Can someone explain what he meant? Soooo many pedals. So little time!!
"why I would have 4 or 5 distortion/drive/fuzz pedals on my effects board..."
DeleteWhy does an artist have 20 colors of paint on his/her palette? Can't we just use two or three colors? Likewise for effects pedals. Heck, there are nearly 300 different fuzz pedal projects on this site!
Anyone getting excessive noise with this circuit? The switch and pots all work as expected but I'm getting loads of excessive background noise.
ReplyDeleteJohnny, im getting tones of noise, its even Lauder than the effect! Hahaha did You found out what was the problem? Thanks in advance
DeletePlayed around with this one and settled on TL072 and ITT 425 diodes. Don't know anything about these diodes but of all the different diodes and LEDs i have these sounded the best. I do get some background noise but its minor.
ReplyDeleteBuilt this and really like the range of sounds and clipping options. I did put a 330p across the led clippers to tame some fizzle on the decay.
ReplyDeleteDid you put the 330p cap on the right side of the D2?
DeleteThis comment has been removed by the author.
ReplyDeleteWhat's the green circle on the right of pin 4 of the IC?
ReplyDeleteThanks
that's a double link. so when you're building it you'll have 2 links in 1 hole. so you have one link from the right of the 100nF cap on row 6 to under pin 4 of the IC, then another from under pin 4 of the IC to the row below.
DeleteI think the 220nF cap at the bottom is not supposed to connect to the bottom row, it is supposed to connect to ground, which is the row just above the bottom. (according to the Madbean schematic) He calls it C4 in the schem. Otherwise it looks right.
ReplyDeleteHi Michael.
DeleteThe layout has already been verified.
The 220n cap (C4) goes from the 1K resistor to ground (there is a link under the IC pin 4)
Yep. I see it now. Thanks. Pedal sounds great - thanks again for the layout.
DeleteThis comment has been removed by the author.
ReplyDeleteVery nice pedal! I used to say that the Suhr Riot was the best od/distortion pedal in such a small format as far as handmade is concerned, but the JHS AT(madbean version), is really better!
ReplyDeleteHere is my build!
Will post samples later
http://hgecontraptions.blogspot.ro/2016/05/built-jhs-andy-timmons-pedal-clone.html
This is one of the greatest pedals, I ever built and tried. The different diode configuration switch is awesome.
ReplyDeleteI want to build this pedal but i don't have an on/off/on switch .i have a few on/on mini switches kicking around .how would i use them or just the one ...
ReplyDeleteI'm trying to build this and there is no sound coming out from it, can someone help me to understand what may be the problem here. Followed exactly the diagram and checked it multiple times. Would it be the LM833P that I'm using?
ReplyDeleteCan you write voltages?
ReplyDeleteI love this pedal! Goes next to my riot build.
ReplyDeleteThere's something wrong in the Mosfet clipping section: another BAT41 Schottky diode is needed for the second 2N7000 as well (like in the Zen Drive clipping section), otherwise you get too an asymmetrical clipping (more than 2.0V for the side with the BAT41, only 0.6V for the side without it)
ReplyDeletewell i think that d4 is also linked to the 2n7000 on the left i guess its still assymetrical because 2 are connected to the left mosfet . anyone else want to chime in?
DeleteHi, I think the clipping section is not correct or badly designed, is it pisible?
ReplyDeleteDo you think it is correct?
I think this layout has been plotted based on this scheme:
http://s1305.photobucket.com/user/jessebelanger1988/media/Mobile%20Uploads/image_zpstxiekqiw.gif.html
but I think the clipping section is poorly drawn.
I think the switch should switch between 2 options:
-clipping 2 red leds
or
-clipping zendrive style,
right?
I think he's not doing it like this
, is it right or am I wrong?
Thanks
This is a zendrive clipping;
ReplyDeletehttp://s90.photobucket.com/user/sympathyforme/media/pedal%20stuff/Zen_Vero.png.html
another question,
ReplyDelete... apologize for my insistence, (I'm in the middle of build this and I need answers)
The switch in the original is 3 positions, up, middle and down. In this design there are only 2 positions, is it correct ???
Hi there, I just build this awesome Pedal, it does really sound awesome, but here is the Problem, it is kind of extremely loud, so if I kick in this Pedal, I can't turn up the volume past 9 o'clock because it then is way to loud, and also if I turn up EQ or Air it is getting louder, maybe that is supposed to happen, but if I turn up EQ and Air fully, I can't get any unity Volume anymore, its always louder or of
ReplyDeleteAny Idea what it could be?
Just built it, and after missing a cap, 3 links, and sticking something in the wrong hole (yeah, that's what she said) I finally got this working. Sounds pretty good, but I'm a little underwhelmed. My LEDs don't light up, unlike my crunchbox, and it doesn't seem to have as much dirt (as my crunchbox).
ReplyDeleteI dunno.
Could you post a close up photo so we can see which troubles you?
DeleteI've actually got another built on the desk that I have to wire pots to and test. That last board got ditched long ago.
DeleteThats A bit strange, the led's should light up when the toggle switch is set to the middle position. Maybe you've burned one of the transistors or the IC? Mine is quite gaini :D
ReplyDeleteBuilt this last weekend and it sounds amazing. I was wondering if it can run at 18V and if so would it make any difference?
ReplyDeleteJust finished this bad boy off today. Sounds awesome and worked first time.
ReplyDeleteReally chuffed with this build. Cheers for the layout Alex
Finished this bad boy today. Sounds awesome and worked first time.
ReplyDeleteCheers for the layout Alex
This comment has been removed by the author.
ReplyDeleteBuild it and works great, first take on the lm833 and it seems a good chip for drive pedal, tons of gain comes out, and a bit louder when the leds clipping switched, maybe I used Bat85 instead of bat41 cause it.. but it still great for me, thanks for layout and here some record shots for share: https://photos.app.goo.gl/axTYcKRjdFw1jfD53
ReplyDeleteSounds like a crunchbox on steroids. Thanks for the layout!
ReplyDeleteGot this up and running, upped the gain pot to 500k though, Might look at a different taper though as rolling the gain off also rolls the treble and the gain is bunched up at the end.
ReplyDeleteHi everyone. The LED+ below where Vol1 should be, where does that go? The LED on/off indicator?
ReplyDeleteExactly, and the 4.7k on the LED+ stripe is the resistor that control the brightness of the LED. You can change the value as you prefer.
DeleteThanks.
DeleteElijah-Baley, I just received an online order package of box film caps and other parts. It's for this build and another. This might be off topic but a capacitor with markings U10nJ2A was included. The "u" was kinda written very small like a superscript. Do you or anyone here know the value of this capacitor? Didn't get any result in google too and tried to contact the seller but didn't get any reply.
DeleteIs this an extra cap you not included on your order? Anyway, it seems pretty clear: "10n" should be the value, 10nF. The "J" means it has a 5% of tolerance. Good enough.
DeleteThis is what I know.
Oh that makes sense now. I ordered a bunch of 103J (10nF) and was too lazy to count. Didn’t know they were lacking 10 or so caps. Must’ve run out of stocks with the 103J markings. Thanks man and sorry to Alex for high jacking his post.
DeleteIf "this is not an exact clone of the original circuit" what's the difference with the original one?
ReplyDeleteI know that the original JHS is the same of the Crunch Box, but the JHS should have a 100nF in parallel with the 22nF to the ground in the tone section. (Somebody said that cap there was none). I see a 1uF cap instead of a 2.2uF.
Anyway, the most important thing I wannt to get is: LED and the BAT41 clipping should be confirmed, but what about the central position of the clipping switch? Mosfet or no diode mode?
I just finished it and it's fine, but I'm surprised that it has little volume, I don't know if it happened to someone else and can give me some clue. Thank you!
ReplyDelete