Pages

▼

Tuesday, 29 January 2013

Pit Fighter

And another request. From Culturejam designs.

Note from the Man himself: I'd recommend going with a higher value for that 47R resistor. Try 220R, 330R, or 470R. Or even a little higher. The lower the value, the more gain there is, but it's really noisy at 47R. Like, unusable noisy, at least on my test build.


at

5 comments:

  1. Unknown29 January 2013 at 19:20

    Thanks!!

    ReplyDelete
  2. Forrest Whitesides30 January 2013 at 16:22

    I'd recommend going with a higher value for that 47R resistor. Try 220R, 330R, or 470R. Or even a little higher. The lower the value, the more gain there is, but it's really noisy at 47R. Like, unusable noisy, at least on my test build.

    ReplyDelete
    Replies
    1. mirosol30 January 2013 at 16:33

      Thanks for info! I'll add it to the post.

      (still didn't get around breadboarding the DownBox...)
      +m

      Delete
    2. Anonymous2 July 2016 at 21:35

      shouldnt there be a 1nf box cap in there? the grind customs schematic i have shows a 1nf running off the input next to the 100n. is this an error? or do vero layouts not necessarily mimic schematics for pcb?

      Delete
  3. Anonymous28 March 2017 at 01:07

    you can mark this as verified btw. i went with 82ohms instead of the 47r mentioned in notes. other than that didt change a thing. sounds great

    ReplyDelete