Pages

▼

Saturday, 29 September 2012

Demeter Fat Control

Info from Demeter about their original:

The Fat Control is an on board guitar mid boost/buffer which includes a wide variable gain mid frequency power booster control and a built-in low impedance buffer that has been installed into a steel stomp box. The Fat Control boosts a wide mid frequency range for a more distinct natural musical frequency boost than all other mid controls. The frequencies selected give your guitar the best response and sustain possible.






at

34 comments:

  1. atomicwombat29 September 2012 at 01:43

    hey Mark- any suggestions on substitutions for the LF442?

    ReplyDelete
    Replies
    1. IvIark29 September 2012 at 01:54

      It's a dual opamp with JFET inputs, so try whatever you've got in your stash. TL072 also has JFET inputs and most people have them, but just try anything you've got that's a dual opamp with the same pinouts. JRC4558, NE5532, LM833, LM1458 etc

      Delete
  2. rudeez29 September 2012 at 10:16

    exactly what i've been looking for! think it's pissible to "daisychain" this with another boost like board? thanks mark, you're the best as always.
    /jimmie

    ReplyDelete
  3. mirosol29 September 2012 at 10:35

    This is perfect. Just a simple, subtle mid boost fattener. This circuit could most definitely be used as pre-board for any circuit. Personally i'm thinking 'bout putting this in front of Compulator to get the perfect, always-on comp/fat/superfat box.

    Aww. Just a perfect mid/fat control board. I'm loving it. Truly a recommended build. At least with som other circuits after it.

    oh. Tag it.
    +m

    ReplyDelete
    Replies
    1. rudeez29 September 2012 at 11:06

      what IC did you go with miro? and damn you're fast with the taggin haha!

      Delete
    2. mirosol29 September 2012 at 11:24

      LF422 and i used socket, so i can try out something else in there if you want.. I don't see any reason why something like TL062, TL072, TL082, NE5532, JRC4558, TLC2262, TLC2272, LM833, LF353, OPA2134 or AD712 wouldn't work.. :)
      +m

      Delete
    3. mirosol29 September 2012 at 11:26

      And yeah. Lazy weekend mornings are really superb time to sip coffee and build simple circuits :)
      +m

      Delete
    4. mirosol29 September 2012 at 11:33

      I just tried on TL072, LF353 and LM833. If there is a difference, it's very very subtle. So. Any dual opamp will work fine.
      +m

      Delete
    5. mirosol29 September 2012 at 11:39

      Actually. There is a slight difference. TL072 seems to break up a bit, as LF422 stays clean(er).
      +m

      Delete
    6. IvIark29 September 2012 at 14:43

      Yay, top man!

      Delete
    7. rudeez29 September 2012 at 21:01

      and i don't have any of those lf422 :( how about 4558 or 5532?

      Delete
    8. IvIark29 September 2012 at 21:18

      Try them and let us know. They're dualopamps so there's no reason why they shouldn't work, but whether they add any grit or not we won't know until you try them :o)

      Delete
    9. mirosol30 September 2012 at 00:24

      With those, i would prolly go with NE5532 instead of 4558. But that is just a gut feelin.. Datasheets say that NE5532 might be closer to LF422 than JRC4558.
      +m

      Delete
    10. rudeez30 September 2012 at 00:51

      sooo, iv'e tried a few now and as you said miro the difference is very very subtle. though i find that the tl072 and ne5532 sound "cleaner" and more open to me then the rest i tried which was tl082, tl062, ad712. wonderful circuit, although i belive that some of the highs get lost when turning up the boost. any ideas what to put before or after this one to make it a solid addition to any other booster/eq circuit?

      Delete
    11. IvIark30 September 2012 at 01:00

      Cool thanks for that mate. The TL072 is a low noise version of the TL082 and the TL062 is the low power consumption model which will have some drawbacks associated with using less power, so your results probably make sense in the respect. The NE5532 is my favourite opamp out of the ones we commonly use, everything I've tried it in sounded better to me, so I had to buy 50 from Tayda to keep me going for a while.

      Delete
  4. Anonymous29 September 2012 at 10:59

    Is it possible to replace the 1N5817 with a BAT85, just because i have these to hand and i want to build this one NOW !!!

    ReplyDelete
    Replies
    1. mirosol29 September 2012 at 11:25

      That's for polarity protection, so you could use 1N4001 or just omit it altogether by placing 9V source to 3rd row instead of first.
      +m

      Delete
    2. Anonymous29 September 2012 at 11:45

      Thanks for that mirosol

      Delete
  5. Satch3 November 2012 at 23:19

    If i want to use buffer wiring...will the buffer switch be in the mid1?

    ReplyDelete
  6. Jaemin Choi6 November 2012 at 08:46

    I'm getting a loud pop noise when I press the foot switch....

    ReplyDelete
    Replies
    1. IvIark6 November 2012 at 08:51

      Well it already has a pulldown resistor so it can't be that. This is the other main cause of popping:

      http://www.muzique.com/lab/led.htm

      Delete
    2. Jaemin Choi8 November 2012 at 12:35

      This comment has been removed by the author.

      Delete
    3. Jaemin Choi8 November 2012 at 12:39

      I haven't put any LED yet.
      Also I noticed the scratch sound when I turn the guitar volume knob, something like the crackling sound from Super Hard On.

      Other than these two problems, this pedal sounds really great.
      Any help would be greatly appreciated.

      Delete
    4. Jaemin Choi6 March 2013 at 05:54

      Any input? please...

      Delete
  7. zosotone10 May 2013 at 15:45

    Try a pulldown resistor between the input effect and ground (1M-2M) and maybe change the pot.

    ReplyDelete
  8. Jarrett Trezzo12 August 2013 at 00:07

    This one is absolutely fantastic. I just love the Demeter effects, I've now done all of the layouts from here available. And all are keepers. Like someone else said this one will be perfect in front of the Compulator. I tried probably 10 different opamps since I don't have an LF442 yet, but found that I like the LM358 the most.

    ReplyDelete
  9. ξεναγός νεκρόπολης10 March 2014 at 16:32

    also build it!nice clean boost. i haven't played with it much yet but i think it's a very good boost to have. better than the s.h.o..
    for me the best ic from what i have was 1458.
    072 and 4558 were too dirty for what i wanted this pedal to be. strange thing is that my only one 5532 was the weakest of all.10 times smaller boost if i can say it that way..
    maybe it's broken...

    ReplyDelete
  10. Mladen23 September 2014 at 21:36

    Hello,

    I need some help. I build Demeter fat control and placed it in my strat as onboard mid boost.
    It sounds good when I want boost, but when I want clean tone it loose some treble, doesn't sound as my clean guitar.

    If I understand well - this pot blends buffered and boosted signal, so I wonder - is it possible to blend clean signal directly from pickups with boosted signal, to get my clean tone when roll of pot?

    Maybe I should use this Mini JFET blend for that?
    http://tagboardeffects.blogspot.com/2012/01/mini-blend-jfet.html

    Thanks,
    Mladen

    ReplyDelete
    Replies
    1. ξεναγός νεκρόπολης24 September 2014 at 00:00

      hello mladen. i did exactly the same thing with my old washburn with a on/off switch for fat controlor original signal. the thing with my guitar is that the tone was really bad anyway, so a didn't understood any loose in the signal at all...!!!mini jfet blend could be a good idea, but if it acts like this
      http://tagboardeffects.blogspot.gr/2010/11/jfet-parallel-looper.html
      which i've build, you'll still won't get your original sound 100%.
      hope i helped.

      Delete
    2. Mladen27 September 2014 at 16:32

      Thank you for replay. I wanted to know does it make sense to try something like that, so I will give it a try. I don't have much room for adding new components so I will try Mini JFET blend, it is really small.

      I already placed push/pull switch, so I can change to bypass anytime, but I would like to make it this way, to use only pot.

      Thanks,
      Mladen

      Delete
  11. MatthieuS25 June 2015 at 10:39

    Hi, i just tried this pedal build and i have a question : do you have to connect the ground of the battery to the input and output jacks?

    Thanks!
    Matthieu

    ReplyDelete
  12. petey twofinger5 December 2016 at 08:24

    This comment has been removed by the author.

    ReplyDelete
  13. jon q16 October 2019 at 19:10

    I'm thinking of throwing this as a toggle in a Wooly Mammoth to see if I can get that to cut a little more... thoughts?

    ReplyDelete
  14. JohnB21 July 2024 at 13:49

    Does anyone know how to turn it into tyler spec?

    ReplyDelete