Pages

▼

Sunday, 25 March 2012

Devi Ever Disaster Fuzz / Krackle Fuzz

Request.  It's all noise to me, but some of you lot seem to like them! :o)

Info from Devi about the original Disaster Fuzz:

Why would you like the Disaster Fuzz?  Because fuck you that’s why.  The disaster fuzz is filled with rolling waves of oscillation… or metal gates.  Depends on what you are looking for.  I guess that’s why there is a handy dandy flip switch to give you the option of one or the other.  The Disaster Fuzz is the little brother of the Truly Beautiful Disaster.  It has just the options you need to make noise, or fuzz love.  It’s only too bad the controls aren’t labeled FUCK and YOU because that’s exactly how you’ll feel when you run a guitar, bass, or vibrating sexual device through this little fuzz.  Demons expel from your fingers.  Cum for days.  This pedal is fancy and amazing.  Don’t feel like a handsome dapper lad after using this pedal?  Then you aren’t doing it right.  Please refer to the manual if you have any problems.  Oh right, there’s isn’t one.  WHO THE FUCK IS FLYING THE PLANE THEN???

So there you have it!

The SPST will switch between the Disaster Fuzz and Krackle Fuzz.





at

31 comments:

  1. Anonymous25 March 2012 at 17:40

    You're a F@*king star my son!

    Thanks a million :)

    ReplyDelete
  2. Anonymous25 March 2012 at 21:24

    Hello Man! Have you got any information about the DbA Harmonic Transformer??

    ReplyDelete
  3. Anonymous26 March 2012 at 13:32

    Verified!! :o)

    Just a note to any other, my transistors went the opposite way to the diagram..check pins.

    I'd buy this just for Devi description!
    You know you're winning when your son says ''aargh dad it's just noise!''
    Suck it up boy! :0)

    ReplyDelete
  4. Anonymous26 March 2012 at 14:19

    When I said 'check pins' I was meaning anyone else building this...It wasn't aimed at you.. just sounds rude :)

    ReplyDelete
  5. IvIark26 March 2012 at 16:00

    Hee hee, no problem. I didn't even check the pinouts to be honest, so it keeps it accurate

    ReplyDelete
    Replies
    1. Anonymous26 March 2012 at 16:12

      Well to be honest, looking at yours now, I had the 2N2222A the 'wrong' way.. It didn't seem to make a difference to the normal switch position but changes the 'Noise/oscillation' position... just something for others to try :)

      Delete
    2. Anonymous26 March 2012 at 16:13

      Also, I had to use 22nf's instead of 20's... will that make much difference?

      Delete
    3. IvIark26 March 2012 at 16:47

      I don't think it would make any difference whatsoever in something like this. My 2N2222A's are metal can which is why I left the orientation as it was.

      Delete
  6. NIAB27 March 2012 at 16:08

    Hiya IvIark!

    A Special Request.

    Devi Ever "Legend of Fuzz" (BIT) seems to be a great sounding pedal, I cant find it on internet. Could you please post that one?
    You definetly Rocks!

    Cheers!

    ReplyDelete
  7. Magic Pedals16 April 2012 at 00:13

    Thanks so much for all these layouts! I've been wanting to give this one a try for awhile, now I have no excuse. Gobs of fuzz!

    ReplyDelete
  8. Anonymous12 June 2012 at 14:46

    Made another one of these and I get below unity at max volume. I'm finding it strange that I'm suddenly having issues with both the Soda Meiser and now this?

    Any ideas before Devi can go f....

    ReplyDelete
    Replies
    1. IvIark12 June 2012 at 15:48

      I'm wondering whether you've got a batch of duff components that are common to both effects. Did you ever get that cap meter?

      Delete
    2. Anonymous12 June 2012 at 16:17

      That's what I'm thinking too..... and no I never did get that cap meter.

      Delete
    3. IvIark12 June 2012 at 16:20

      Send one to me (rather than binning it :o) and I'll cut all the components out and measure them and see what's going on.

      Delete
    4. Anonymous12 June 2012 at 16:35

      I could do, The only things that this and the Soda have in common are the resistors and I've checked they're the right value. Plus I rebuilt the Soda with all ceramics to see if the polys were the problem.and I've recently made a RAH/Plexi/MXR with no issues with the same caps. I may have another fiddle with it later, I just don't want to send it and find it's a silly error on my part.

      Delete
    5. Anonymous12 June 2012 at 17:51

      Ok, fixed it. First I had a 10m in place of a 10k (slapped).That solved the volume issue but it sounded terrible (worse than normal I heard you think?)So I started changing all the 10n's, testing it in between each change and the sound slowly got better until they were all changed to ceramics, now it works perfectly.

      It really doesn't install much confidence in buying 'higher quality' components.

      Delete
  9. Unknown4 November 2012 at 18:09

    Mark, wanted to ask you about doing a layout. couldn't find your email.
    Graphic Fuzz by Earth sound research.... seems simple. and oddly similar to this Devi pedal.

    ReplyDelete
  10. leaf23 March 2013 at 17:54

    HI, any replacement for PN2907A? Thanks a lot.

    ReplyDelete
  11. David15 April 2014 at 15:20

    Hello and thank you for this excellent website!

    I just recently build the Disaster/Krackle fuzz following the layout provided here and I'm having a problem which will become clear by watching this:

    http://murha.net/david/misc/krackleborked.MOV

    I had to replace the MPSA18 transistor with a 2N5089 and the PN2907As with 2N2907A-PLs, as these were hard to come by. I also used 20n caps instead of 22's. Could these have affected? I'll gladly post more info when needed!

    ReplyDelete
    Replies
    1. David15 April 2014 at 15:32

      Whoops! Meant to say that I used 22's instead of 20's...

      Delete
    2. Unknown28 July 2015 at 17:13

      I'm going to start building this pedal. So did you ever switch out the parts and see if it worked...?

      Delete
    3. Unknown29 July 2015 at 05:24

      Actually, I just saw the video you posted...that sounds great actually! lol

      Delete
  12. DerPr11 November 2016 at 12:26

    HI!! can anyone tell me, how to make that self oscillation switch like on PGS demo? if i understanding correctly - SPST in the layout is switch to another Devi pedal but not to oscillation

    ReplyDelete
    Replies
    1. DerPr21 November 2016 at 15:34

      sorry for stupid question! just made that FX and it works as on PGS demo :D

      Delete
  13. Wyn Stewart12 July 2018 at 20:20

    is there a schematic for this pedal somewhere here?

    ReplyDelete
  14. The Dood15 August 2018 at 07:01

    Newb here. Where does sw3 go? ground? Thanks everyone

    ReplyDelete
    Replies
    1. Zach15 August 2018 at 09:49

      There is no 3rd lug on the switch, it’s a SPST (single pole, single throw) which has only 2 lugs.

      Delete
    2. The Dood15 August 2018 at 15:10

      Thanks for the speedy response Zach! I guess i got a spdt. I'm guessing lugs 1 and 3 will work? Can you explain the basic difference in dum-dum terms for me please?

      Thanks again

      Delete
    3. Zach15 August 2018 at 21:28

      You’ll use lug 2 (middle) and one of the outside lugs, and you can cut the one you’re not using off.

      You’ll see with switches the terms pole and throw, SPST, DPDT, 3PDT, etc. Since I can’t post pics in a response, I think this is a great clear explanation.

      https://learn.sparkfun.com/tutorials/switch-basics/poles-and-throws-open-and-closed

      Delete