Here's a collection of vero (stripboard) and tagboard guitar and bass effect layouts that we have put together covering many classic and popular effects in growing numbers. Many of these have been posted on freestompboxes.org, so check that site out for great discussions on building your own effect pedals. Enjoy the builds and please also visit us on Facebook and Twitter
Probably, someone mentioned that it was noisy. If you've socketed the opamp it may be worth trying a couple of others if you have a few LM386's or JRC386's, to see if you can reduce the noise. Thanks for verifying.
Hi, I've built this a few times and each time, it seems like it doesn't quite reach the volume of the bypassed signal. I lowered the value of the 470K resistor and this seemed to get it to be a good bit louder. The thing now is that when I turn on my MXR Carbon Copy after it, the volume almost doubles. Any ideas how I could fix this? Thanks for your time, and great site. Cliff
Its verified :) BUT
ReplyDeleteDoes this pedal really have this much noise and low volume? Sounds great though.
Probably, someone mentioned that it was noisy. If you've socketed the opamp it may be worth trying a couple of others if you have a few LM386's or JRC386's, to see if you can reduce the noise. Thanks for verifying.
ReplyDeleteHi, I've built this a few times and each time, it seems like it doesn't quite reach the volume of the bypassed signal. I lowered the value of the 470K resistor and this seemed to get it to be a good bit louder. The thing now is that when I turn on my MXR Carbon Copy after it, the volume almost doubles. Any ideas how I could fix this? Thanks for your time, and great site.
DeleteCliff
Got this together, slightly noisy, but sounds gnarly!
ReplyDelete