tag:blogger.com,1999:blog-6847048658257278783.post6142375782688901794..comments2024-03-29T01:36:12.851+00:00Comments on Guitar FX Layouts: Chaos DistortionIvIarkhttp://www.blogger.com/profile/08416945174853142251noreply@blogger.comBlogger9125tag:blogger.com,1999:blog-6847048658257278783.post-69963436092476800082021-04-05T18:19:19.618+01:002021-04-05T18:19:19.618+01:00Nice sounding over-distor!
Built it without the eq...Nice sounding over-distor!<br />Built it without the eq section.<br />Sounds greatAnonymoushttps://www.blogger.com/profile/13162667325273521777noreply@blogger.comtag:blogger.com,1999:blog-6847048658257278783.post-9288846669405451992015-04-12T18:38:11.815+01:002015-04-12T18:38:11.815+01:00Sorry should have mentioned i used LM1458 for IC a...Sorry should have mentioned i used LM1458 for IC and 1N4148s for diodes. I also had to put a 33pf and a 22pf in parallel to get close to 56pf. This pedal could be amazing with some minor tweaks i reckon.Hozy31https://www.blogger.com/profile/16714771534041521767noreply@blogger.comtag:blogger.com,1999:blog-6847048658257278783.post-40808995258263618672015-04-12T18:34:03.085+01:002015-04-12T18:34:03.085+01:00Really loud pedal and actually an alright thrashy ...Really loud pedal and actually an alright thrashy fuzz. Unfortunately a bit bassy for my liking. Any suggestions as to what caps or resistors to mess with to reduce the bass on this it? Thanks in advance.Hozy31https://www.blogger.com/profile/16714771534041521767noreply@blogger.comtag:blogger.com,1999:blog-6847048658257278783.post-84758619831026324002014-05-23T18:47:56.185+01:002014-05-23T18:47:56.185+01:00It´s a really noisey unity. And get´s radio too. I...It´s a really noisey unity. And get´s radio too. It was dismantled. There are a lot of better circuits.borattohttps://www.blogger.com/profile/00102211964316265559noreply@blogger.comtag:blogger.com,1999:blog-6847048658257278783.post-54426154942844302312014-02-13T16:28:04.372+00:002014-02-13T16:28:04.372+00:00Just built this and I have a problem I wanted to r...Just built this and I have a problem I wanted to run past you. First off I'm a new builder, I don't know exactly what subbing out some parts will do to an effect on a technical level, so I'll disclose everything I did differently here. The problem is ALOT of noise coming from the effect, bypass is obviously no problem so not cables etc. I ran through the normal trouble shooting, no bridges, no missing parts etc, but I have used a few different ones. The most questionable is that the 1uf Electro cap on mine is a mylar film. I didnt have an electro on (is in the mail). I also have some poly film ones, could this be the issue? other thing is the 2,2k resistor (again in the mail) I popped in a 4.7k one as the closest thing to my hand (do have 1k ones though). And finally the Opamp is a JRC4558 as its what I have loads of, I realize that it might create more noise than the suggested one, but the noise I have here is crazy. Also no grounding issues etc. Something obvious Ive missed or is it just a matter of waiting for the correct parts. The 1uf cap in particulair (power filtering or something). Anonymoushttps://www.blogger.com/profile/03276620455545660786noreply@blogger.comtag:blogger.com,1999:blog-6847048658257278783.post-61857372150044653402013-12-22T20:51:31.625+00:002013-12-22T20:51:31.625+00:00SoundClip of this gear: https://soundcloud.com/mbo...SoundClip of this gear: https://soundcloud.com/mboratto/chaos-soundclip-pedal-testborattohttps://www.blogger.com/profile/00102211964316265559noreply@blogger.comtag:blogger.com,1999:blog-6847048658257278783.post-6170103554547065252013-12-17T18:43:04.250+00:002013-12-17T18:43:04.250+00:00Thank you. I chained gain 1 with gain2. It´s a bi...Thank you. I chained gain 1 with gain2. It´s a bit muffled for my tastes, the tone control deserves a better usable range too. Besides i am not a good player I will try to record something in a few weeks, just to register it, it´s difficult to find samples of that pedal.borattohttps://www.blogger.com/profile/00102211964316265559noreply@blogger.comtag:blogger.com,1999:blog-6847048658257278783.post-73512106659493261732013-12-13T08:20:10.447+00:002013-12-13T08:20:10.447+00:00That lug needs to be unconnected or chained with g...That lug needs to be unconnected or chained with gain 2. Either way. For more output, you could try upping the 100K resistor above D4 for 220K.<br />+mmirosolhttps://www.blogger.com/profile/02400327798106357876noreply@blogger.comtag:blogger.com,1999:blog-6847048658257278783.post-46135469736996260222013-12-13T02:29:13.761+00:002013-12-13T02:29:13.761+00:00Build this today, all works good, maybe a bit more...Build this today, all works good, maybe a bit more of volume will be cool, in case you need to drive more a amp. Just need to check what to do with Gain 1 Lug.borattohttps://www.blogger.com/profile/00102211964316265559noreply@blogger.com