Sunday, 7 May 2017

Emanating Fist Electronics Dope Priest - Frequency Sustainer

From the captain:


Take 3. D*A*M Ram Head -> Emanating Fist Electronics XB-70 -> Emanating Fist Electronics Dope Priest. Same shit just a little more refined with an air of maturity, if the Ram Head was a bottle of Jim Beam the Priest is a bottle of Wild Turkey. As with the XB-70 the core circuit influence here is my slowly decaying 1977 Guild Foxey Lady though this time the circuit blue print is tailored to my own ears and tastes rather than just replication. I've taken some influence from V3 Sovteks and the Triangle Muffs, basically lowered background noise, tighter projection and greater ability to cut through dense frequencies. It ain't no reinvention of the wheel just the delivery of sounds that I dig in regards to this circuit type presented in way that appeals to me more than our past incarnations.

Original Pedal:

With a Mids Switch:


8 comments:

  1. D5 is marked but not listed as to what it is, there are 2 listings D1-D4 as 1n914 and a D1 as 1n5187?

    ReplyDelete
    Replies
    1. yea is 1n5187. it's mislabled at the bottom as D1. i'll correct the layout.

      Delete
  2. Built and using 2n5088's in sockets for the moment. The original uses BC549C's Thank you so much!

    ReplyDelete
    Replies
    1. And it just really came alive using 2n5089's I'll try to get a hold of a quartet of BC549C's (like the original) or BC550C's.

      Delete
  3. Awesome! Is there a schematic available? Didnt find it on FSB.

    ReplyDelete
    Replies
    1. There isn't. It's just s big muff with some value differences. Worked on it from gutshots.

      Delete
  4. Awesome. Thanks for posting that layout. High on the "to-build" list.

    ReplyDelete
  5. Built and sounds good. The BMP tone-stack on this one is quite nice. Lots of usable area in the EQ control.

    ReplyDelete