Thursday 21 April 2016

Menatone Pig

Here is the Menatone Pig overdrive.
There are two layouts: one with trimpots to help bias the JFets (would start at 9V) and one with fixed resistors (probably need to test different values to bias the JFets properly).
I've also added a charge pump (it works at 18V).
You can find the original thread from FSB here.



8 comments:

  1. I had no idea that this was traced. Must build!!

    ReplyDelete
    Replies
    1. There is another stripboard layout (sans trimmers) around. I've built that before, but Alex's layout is again way better than the previous version.
      +m

      Delete
  2. Another one to add to the "to do" list. Thanks Alex!

    ReplyDelete
  3. Nice circuit and nice pedal , but JFET...

    ReplyDelete
    Replies
    1. J201. They're all labelled on the edges of the board.

      Delete
  4. I just built the board with trimmers. It's verified. Nice work Alex!

    ReplyDelete
  5. Cool! Thanks Travis!
    How does it sound?

    ReplyDelete
  6. Sounds pretty damn good. Pretty much just like the demo. I used PN4393 to verify since I didn't feel like soldering up the SMD J201 boards. They work fine.

    I've tried adjusting the 100K trimmer while playing, it doesn't make a huge difference really

    ReplyDelete